so far so good , little expensive however it works perfectUPDATESometimes , the factory screen will flicker and not light up , the controls and functions will still work ( As long as you can remember what button to hit without seeing it on the screen )The back up camera will work when you put the truck in reverse however the screen will go black again when you shift out of reverseThis kit would have been a home run if it was not for this problemI did update the unit before install ( requires the wire harness to power up ) so you need to do this before you install all the wire harnesses , Metra will not sell you any piece of this kit!The tech support was not very helpful ( they like to deal with installers )>>>this is my opinion>>> they deal with people with assorted backgrounds related to car electronics and that is not easy, This unit is the only answer if you want to upgrade the audio in this truck and does a good job if you can live with a blank factory screen from time to timeCheck the mylar plugs and jacks on the wire harnesses , they are sloppy and you may have problems if you don't correct any sloppy plugs before installsolder all connections where you can and I used a good chassis ground instead of the factory wire ( as per tech support)I think the brain to the unit does not properly switch the can bus signal from the truck to the screen!.... I think the signal from the truck is to weak for the electronics they are usingPlease let me know if you have this problem and better still if there is a fix for itPS , I tried a dif brain to no avail